Changes to Step #12
Step Lines
| + | [title] Power Supply Installation - Arduino Mega Shield Test |
|---|---|
| + | [* 10] ***Prepare the following components:*** |
| + | [* 2] Arduino Mega Shield |
| + | [* 3] 2-pin 18AWG xmm long |
| + | [* 4] 2-pin 22AWG xmm long and xmm long |
| + | [* 5] M3x8mm Screws (x8) |
| + | [* 6] Connect the PSU and Mega Shield using the 22AWG xmm long wires, and plug in the power in the Switch and get the multi meter ready for test |
| + | [* 7] Turn on the power, and test the left MP1584EN output voltage to be xV, adjust using the potentiometer |
| + | [* 8] test the right MP1584EN output voltage to be xV . |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added