| - | [* 1] Insert the Rocker Switch into the Case. |
|---|
| - | [* 2] Some version of Rocker Switch has smaller mounting holes, if this is the case, M4 Fasteners will no longer be viable |
|---|
| - | [* 3] Therefore use the ***M3x10mm Screws, Washers and Nylock Nuts*** |
|---|
| - | [* 5] Secure the Rocker Switch with the fasteners |
|---|
| + | [* 1] Insert the ***Rocker Switch*** into the Machined Case. |
|---|
| + | [* 9] Some version of ++Rocker Switch has smaller mounting holes++ |
|---|
| + | [* 3] if this is the case, use the ***M3x10mm Screws, Washers and Nylock Nuts*** |
|---|
| + | [* 4] If not, use ***M4x14mm Screws and M4 Nylock Nuts*** |
|---|
| + | [* 5] Secure the ***Rocker Switch*** with the fasteners |
|---|