Changes to Step #8
Step Lines
| + | [title] Power Supply Installation - PSU Mounting Plate |
|---|---|
| + | [* 2] Use 2 Hex nuts per M4x14mm Screws as spacer on the Acrylic Mounting Plate |
| + | [* 1] Align the PSU and the Acrylic Mounting Plate as shown in the figure exactly |
| + | [* 3] Take a closer look on the Screw Terminal of PSU |
| + | [* 4] Take a closer look on the "Half Moon" cut on the Plate |
| + | [* 6] Flip the Acrylic Mounting Plate on to the PSU |
| + | [* 9] DON'T tighten 1 screw all the way at a time, this will cause the plate to flex and cause it break |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added