Changes to Step #6

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Case Wall Mount - Installation
[* 2] Insert the Case Wall Adapter into the Case and secure its place using the ***M3x10mm Screws***.
-[* 3] Use the ***M3 Nylock Nuts*** on the inside of the case but don't tighten it too much. Case wall adapter should be able to slide along the wall
+[* 3] Use the ***M3 Nylock Nuts*** on the inside of the case but ++don't tighten it too much++. ''Case wall Adapter should be able to slide along the wall''