Changes to Step #4
Step Lines
| [title] Case Wall Mount - GX16 Aviation Connectors 2 | |
| - | [* 2] Feed the ***Cables*** through the ++Wall Adapter++ as labelled. |
| + | [* 10] Familiarize yourself with the panel. The back side has a lip and the front side is labelled with each connector. |
| + | [* 2] Feed the ***Cables*** through the ++Wall Adapter++ as labelled. Make sure the long end of the cable ends up on the ''back'' side of the panel. |
| [* 3] Tighten the ***Mounting Nut*** that was unscrewed from the previous step | |
| [* 5] ***Repeat*** the same process with the rest of the connectors | |
| - | |
| + | [* 6] Be sure the ***alignment mark*** on the plug to be in the ++bottom center++ |