Changes to Step #4
Step Lines
| [title] Case Wall Mount - GX16 Aviation Connectors 2 | |
| [* 2] Feed the connectors through the wall adapter as labelled. | |
| [* 3] Tighten the Mounting nut that was unscrewed from the previous step back to the connector | |
| - | [* 5] Repeat the same process with the rest of the connectors |
| + | [* 5] ***Repeat*** the same process with the rest of the connectors |
| [* 6] Be sure to align the alignment set on the plug to be in the bottom center |