Changes to Step #14

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Arduino Installation - Parts
[* 10] ***Prepare the following components:***
- [* 1] Arduino Mega
- [* 2] [3D] Arduino Standoffs and Tray
- [* 3] 4-pin Motor Signal cables (see next steps for assembly guide)
+ [* 1] Arduino Mega 2650
+ [* 2] [3D] Arduino Tray and Standoffs
+ [* 3] 4-Wire Signal Cable 22AWG {for Motor}
[* 5] M3x10mm Screws (x4)
[* 6] M3x16mm Screws (x5)
[* 7] M3 Hex Nuts (x2)
[* 8] M3 Nylock Nuts (x2)