Changes to Step #14

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Arduino Installation - Parts
[* 10] ***Prepare the following components:***
[* 1] Arduino Mega
[* 2] [3D] Arduino Standoffs and Tray
- [* 3] Motor Signal cables (already assembled to length)
+ [* 3] 4-pin Motor Signal cables (see next steps for assembly guide)
[* 5] M3x10mm Screws (x4)
[* 6] M3x16mm Screws (x5)
[* 7] M3 Hex Nuts (x2)
[* 8] M3 Nylock Nuts (x2)