Changes to Step #14

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

-[title] Arduino Installation - parts
+[title] Arduino Installation - Parts
[* 1] Prepare following
[* 1] Arduino Mega
[* 1] [3D] Arduino Standoffs and Tray
[* 1] Motor Signal cables (already assembled to length)
[* 1] M3x10mm Screws (x4)
[* 1] M3x16mm Screws (x5)
[* 1] M3 Hex Nuts (x2)
[* 1] M3 Nylock Nuts (x2)