Changes to Step #14

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

[title] Arduino Installation - parts
[* 1] Prepare following
-[* 1] Arduino Mega
-[* 1] [3D] Arduino Standoffs and Tray
-[* 1] Motor Signal cables (already assembled to length)
-[* 1] M3x10mm Screws (x4)
-[* 1] M3x16mm Screws (x5)
-[* 1] M3 Hex Nuts (x2)
-[* 1] M3 Nylock Nuts (x2)
+ [* 1] Arduino Mega
+ [* 1] [3D] Arduino Standoffs and Tray
+ [* 1] Motor Signal cables (already assembled to length)
+ [* 1] M3x10mm Screws (x4)
+ [* 1] M3x16mm Screws (x5)
+ [* 1] M3 Hex Nuts (x2)
+ [* 1] M3 Nylock Nuts (x2)