Changes to Step #22

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

+[title] Stepper Drivers Preparation
+[* 10] ***Prepare the following components:***
+ [* 1] Stepper Drivers
+ [* 1] [3D] Stepper Driver Adapters
+ [* 1] M3x10mm Screws (x12)
+ [* 1] M3 Nylock Nuts (x12)
+[* 1] Secure 3, DM320T Drivers on the adapter with 3 Slots using M3x10mm Screws and Nylock Nuts
+[* 1] Do the same with the DM542T and DM556T Drivers for 2-Slot-Adapter and DM542T Single Adapter
+ [* 9] Notice the Orientation of the Drivers Relative to the Adapter