Changes to Step #7
Step Lines
| [title] Power Supply Preparation | |
| [* 10] ***Prepare the following components:*** | |
| [* 2] 24V-20A Power Supply | |
| [* 3] [LSR] Acrylic PSU Mounting Plate | |
| - | [* 4] M4x14mm Screws (x4) |
| + | [* 1] Rocker Switch |
| + | [* 4] M4x14mm Screws (x6) |
| [* 5] M4 Hex Nuts (x8) | |
| - | [* 6] Secure the M4 Screws on the Acrylic Plate using 2 M4 Hex Nuts per screw as a spacer |
| - | [* 7] Align the PSU as shown in the picture and tighten the M4 Screws. |
| + | [* 1] M4 Square Nuts (x2) |