Changes to Step #7

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

+[title] Power Supply Preparation
+[* 10] ***Prepare the following components:***
+ [* 2] 24V-20A Power Supply
+ [* 3] [LSR] Acrylic PSU Mounting Plate
+ [* 4] M4x14mm Screws (x4)
+ [* 5] M4 Hex Nuts (x8)
+[* 6] Secure the M4 Screws on the Acrylic Plate using 2 M4 Hex Nuts per screw as a spacer
+[* 7] Align the PSU as shown in the picture and tighten the M4 Screws.