Changes to Step #5

Edit by Dan Royer —

Edit approved by Dan Royer

Before
After
Unchanged

Step Lines

+[title] Install firmware (optional)
+[* 1] If you purchased your zarplotter from us then your firmware is already installed.
+[* 1] You can download it from https://www.marginallyclever.com/product/makelangelo-firmware/
+[* 1] All upload steps are the same as our makelangelo firmware update tutorial EXCEPT that in configure.h you have to change ***#define MACHINE_STYLE POLARGRAPH*** to say ***#define MACHINE_STYLE ZARPLOTTER*** before upload.