Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
  1. [3D] Electronic Case Package
    • [3D] Electronic Case Package

    • Electronics

    • Alan Keys

    • Flat Screw Driver

    • Needle Nose Pliers

    • Multimeter

    • Ferrule Crimper (optional)

  2. Prepare the following components: Machined Case
    • Prepare the following components:

    • Machined Case

    • [3D] Case Wall Adapter

    • GX16 Aviation Plug Male (wire assembled and numbered)

    • USB-B (M/F) Extension

    • M3x10mm Screws (x3)

    • M3 Nylock Nuts (x5)

  3. Unscrew the Wall Mount Nuts from each connectors Each Connectors have 2 sets of 4pin wires soldered in this specific manner [PIC of wires to pin of the plugs]
    • Unscrew the Wall Mount Nuts from each connectors

    • Each Connectors have 2 sets of 4pin wires soldered in this specific manner [PIC of wires to pin of the plugs]

    • The wires are cut to length as follows:

    • 0 & 1 = 315mm & 315mm respectively

    • 2 & 3 = x mm & xmm respectively

    • 4 & 5 = x mm & xmm respectively

    • Not Labelled = Tool --> x mm

    • Prepare the following components:

    • 24V-20A Power Supply

    • [LSR] Acrylic PSU Mounting Plate

    • Rocker Switch

    • M4x14mm Screws (x6)

    • M4 Hex Nuts (x8)

    • M4 Square Nuts (x2)

    • Prepare following

    • Arduino Mega

    • [3D] Arduino Standoffs and Tray

    • Motor Signal cables (already assembled to length)

    • M3x10mm Screws (x4)

    • M3x16mm Screws (x5)

    • M3 Hex Nuts (x2)

    • M3 Nylock Nuts (x2)

    • Prepare the following components:

    • Stepper Drivers

    • [3D] Stepper Driver Adapters

    • M3x10mm Screws (x12)

    • M3x8mm Screws (x9)

    • M3 Nylock Nuts (x12)

    • Prepare the following components:

    • Screw Terminal Blocks from the Drivers

    • 2-pin Power Wires 18AWG (10cm)

    • 2 pin Power Wires 18AWG 15cm

    • 2 pin Power Wires 22AWG 15cm (x2)

    • 22 AWG solid Wires Black 3cm (x6)

    • [Opt] - Ferrule Crimp Pins (x4)

Dan Royer

Member since: 2/13/19

7,136 Reputation

37 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 7

All Time: 788