Skip to main content

You're viewing a previously published revision of this guide.  View latest revision

Older Newer
    • [3D] Electronic Case Package

    • Electronics

    • Alan Keys

    • Needle Nose Pliers

    • Prepare the following components:

    • 24V-20A Power Supply

    • [LSR] Acrylic PSU Mounting Plate

    • M4x14mm Screws (x4)

    • M4 Hex Nuts (x8)

    • Secure the M4 Screws on the Acrylic Plate using 2 M4 Hex Nuts per screw as a spacer

    • Align the PSU as shown in the picture and tighten the M4 Screws.

    • Prepare the following components:

    • Stepper Drivers

    • [3D] Stepper Driver Adapters

    • M3x10mm Screws (x12)

    • M3 Nylock Nuts (x12)

    • Secure 3, DM320T Drivers on the adapter with 3 Slots using M3x10mm Screws and Nylock Nuts

    • Do the same with the DM542T and DM556T Drivers for 2-Slot-Adapter and DM542T Single Adapter

    • Notice the Orientation of the Drivers Relative to the Adapter

    • Prepare the following components:

    • Prepared PSU and Drivers

    • M3x10mm Screws (x17)

    • Case (machined and holes threaded to M3)

    • Rocker Switch (w/ Wires Soldered)

Dan Royer

Member since: 2/13/19

7,136 Reputation

37 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 788