You're viewing a previously published revision of this guide.  View latest revision

Older
Feb 26, 2019 - 10:02:31
Oct 22, 2024 - 11:10:24 Oct 21, 2023 - 10:10:29 Oct 19, 2023 - 04:10:06 Oct 19, 2023 - 04:10:59 Oct 19, 2023 - 04:10:43 Mar 02, 2023 - 09:03:21 Jan 20, 2023 - 09:01:48 Dec 22, 2022 - 04:12:39 Dec 22, 2022 - 04:12:47 Dec 22, 2022 - 04:12:06 Dec 22, 2022 - 04:12:19 Sep 19, 2021 - 02:09:17 Aug 29, 2021 - 10:08:57 Jul 11, 2021 - 03:07:58 Jul 11, 2021 - 03:07:59 Feb 27, 2020 - 04:02:46 Feb 27, 2020 - 04:02:37 Feb 27, 2020 - 04:02:28 Feb 27, 2020 - 04:02:00 Feb 27, 2020 - 04:02:15 Feb 27, 2020 - 04:02:54 Feb 27, 2020 - 04:02:06 Feb 27, 2020 - 04:02:05 Nov 18, 2019 - 04:11:36 Aug 30, 2019 - 04:08:50 Jul 24, 2019 - 11:07:01 Jul 24, 2019 - 11:07:59 Feb 26, 2019 - 10:02:36 Feb 26, 2019 - 10:02:31 Feb 14, 2019 - 05:02:48 Feb 14, 2019 - 05:02:38 Feb 14, 2019 - 10:02:26 Feb 13, 2019 - 05:02:10 Feb 13, 2019 - 05:02:56 Feb 13, 2019 - 05:02:55 Feb 13, 2019 - 05:02:49 Feb 13, 2019 - 05:02:28 Feb 13, 2019 - 05:02:29 Feb 13, 2019 - 05:02:06 Feb 13, 2019 - 05:02:35 Feb 13, 2019 - 05:02:17 Feb 13, 2019 - 05:02:41 Feb 13, 2019 - 05:02:09 Feb 13, 2019 - 05:02:51 Feb 13, 2019 - 05:02:52 Feb 13, 2019 - 01:02:50 Feb 13, 2019 - 01:02:52 Feb 13, 2019 - 01:02:27
Newer

Makelangelo 5 window setup

Written By: Dan Royer
  • Comments: 2
  • Favorites: 0

Difficulty

Easy

Steps

5

Time Required

00:05:00

Sections

1

Flags

1

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Quiz

0

  1. Moist all 4 suction cups and press the main board against a vertical,flat and clean window or glass. Try to place Makelangelo as level as possible, at least 110cm (44") above any interference (such as a window frame)

    • Moist all 4 suction cups and press the main board against a vertical,flat and clean window or glass.

    • Try to place Makelangelo as level as possible, at least 110cm (44") above any interference (such as a window frame)

  2. Prepare the belt with the counterweights and insert it onto motor pinion gear. Try approaching the pinion gear sideways as shown in the picture for easy belt installation. Make sure the belt sits firm on the pinion gear. Make sure the belt sits firm on the pinion gear.

    • Prepare the belt with the counterweights and insert it onto motor pinion gear. Try approaching the pinion gear sideways as shown in the picture for easy belt installation.

    • Make sure the belt sits firm on the pinion gear.

  3. Connect weights to pen holder arms using provided hooks. Make sure arms move smoothly when running, if not, sand down the contacting surface of arm rings.

    • Connect weights to pen holder arms using provided hooks.

    • Make sure arms move smoothly when running, if not, sand down the contacting surface of arm rings.

  4. Slide in a sharpie and secure it with the screw. The tip should be pointing out just enough to touch painting surface when mini-servo is not in the extended position Slide in a sharpie and secure it with the screw. The tip should be pointing out just enough to touch painting surface when mini-servo is not in the extended position

    • Slide in a sharpie and secure it with the screw. The tip should be pointing out just enough to touch painting surface when mini-servo is not in the extended position

  5. Connect servo cable and USB cable Start drawing!

    • Connect servo cable and USB cable

    • Start drawing!

Author

Dan Royer

Member since: 2/13/19

7,136 Reputation

37 Guides authored

View Statistics:

Past 24 Hours: 5

Past 7 Days: 14

Past 30 Days: 77

All Time: 6,307