You're viewing a previously published revision of this guide.  View latest revision

Older
Jul 19, 2019 - 12:07:48
Oct 30, 2022 - 11:10:37 Jul 11, 2021 - 03:07:26 Nov 18, 2019 - 04:11:12 Nov 18, 2019 - 04:11:42 Jul 19, 2019 - 12:07:55 Jul 19, 2019 - 12:07:37 Jul 19, 2019 - 12:07:04 Jul 19, 2019 - 12:07:13 Jul 19, 2019 - 12:07:59 Jul 19, 2019 - 12:07:48 Jul 19, 2019 - 12:07:35 Jul 19, 2019 - 12:07:44 Jul 19, 2019 - 12:07:20 Jul 19, 2019 - 12:07:30
Newer

How to Assemble the belt, counterweight, and hook

Written By: Dan Royer
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

2

In Progress

In Progress

This guide is currently being written. Reload periodically to see the latest changes.

Private

Private

This guide will not appear in search results and can only be viewed by team members!

Quiz

0

  1. 10x1cm of velcro

    • 10x1cm of velcro

    • 100g weight

    • Y clip

    • Switch disc

    • Hook

    • GT2 timing belt

    • Makelangelo robots have the exact same parts on two sides of the machine so get TWO of everything.

  2. Feed one end of the belt through the disc. Make sure the last tooth of the belt is completely into the Y clip. Press the belt into the groove. it is supposed to be a snug fit.

    • Feed one end of the belt through the disc.

    • Make sure the last tooth of the belt is completely into the Y clip.

    • Press the belt into the groove. it is supposed to be a snug fit.

    • Bring the disc in and press it over the Y clip so that the long side of the slot is pressed against the belt.

Author

Dan Royer

Member since: 2/13/19

7,136 Reputation

37 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 8

All Time: 1,522